Print Advisor — Expert 3D Print Settings for Every Printer

Print Advisor is a free tool that provides expert-curated print settings for Bambu Lab, Creality, and Snapmaker 3D printers and 22+ filament materials.

Features

AI-powered filament picker — describe your project and get the best material
Expert print settings for PLA, PETG, ABS, ASA, TPU, Nylon, PC, PPA-CF, PPS-CF, and more
AI-powered print issue troubleshooter with error code lookup
Slicer profile export for Bambu Studio, Cura, and Luban
Filament drying guide and before-you-print checklist

Supported Printers

Bambu Lab: X1 Carbon, X1, X1E, H2D, H2D Pro, H2S, H2C, P1S, P1P, P2S, A1, A1 Mini | Creality: Ender 3 V3 SE, V3 KE, S1 Pro | Snapmaker: J1, Artisan

Supported Materials

PLA Basic, PLA Matte, PLA-CF, PLA Silk+, PLA Tough+, PLA Aero, PLA Wood, PETG HF, PETG Translucent, PETG-CF, ABS, ASA, ASA-CF, TPU 95A HF, TPU 85A/90A, PAHT-CF, PA6-CF, PA6-GF, PC, PET-CF, ABS-GF, PPA-CF, PPS-CF

Please enable JavaScript to use Print Advisor.

Structural / Functional Issue

How to Fix Power Loss / Print Resume After Outage

Step-by-step fix for power loss / print resume after outage on Bambu Lab printers including X1C, H2D, P1S, and A1.

How do I fix power loss / print resume after outage?

1
If the model is still adhered: tap "Resume" on the printer screen. Don't move the plate or toolhead before resuming.
2
If resume fails: the Z-height position was lost and the print cannot be recovered. Restart from scratch.
3
To prevent issues: connect the printer to a UPS battery backup for long critical prints.

Pro tip: Resumed prints may have a weak layer at the pause point. Select "High Strength" above for settings that compensate.

Related Print Issues

Weak Layer Adhesion / Delamination Part Breaking Along Layer Lines Poor Dimensional Accuracy Part Too Flexible / Not Stiff Enough Bed Adhesion Failure / Part Detaching

Still having issues?

Try our AI-powered troubleshooter — describe your problem in your own words and get personalized fixes.

Open AI Troubleshooter

Browse All Print Issues

Uneven First Layer Stringing / Oozing Visible Layer Lines Elephant Foot (First Layer Bulge)Warping / Curling / Lifting Visible Z-Seam Rough / Droopy Overhangs Blobs / Zits on Surface Ghosting / Ringing Weak Layer Adhesion / Delamination Part Breaking Along Layer Lines Poor Dimensional Accuracy Part Too Flexible / Not Stiff Enough Bed Adhesion Failure / Part Detaching Support Removal Damage / Scars Infill Showing Through Walls Heat Creep / Clogging Mid-Print Thin Walls Breaking / Gaps in Thin Features Part Deforms in Heat / Sun Spaghetti / Print Detached Mid-Print Under-Extrusion (Sparse Lines / Missing Material)Over-Extrusion (Blobby / Too Much Material)Nozzle Clog (Blocked / No Extrusion)Extruder Clog (Filament Stuck in Gears)Filament Sticking to Nozzle (PETG)Bad Bridging Quality (Sag or Snap)Belt Pattern / VFA (Vertical Fine Artifacts)Gaps / Holes in Top Layer Different Gloss / Sheen on Different Areas Interlayer Cracking (ABS/ASA/PC/PA)Model Collapsing / Nozzle Hitting Print Wet / Damp Filament (Popping, Bubbles)Layer Shifting (Layers Offset Mid-Print)AMS Filament Tangled / Spool Stuck AMS Filament Ran Out Mid-Print AMS Cutter Stuck / Failed to Cut Filament Pile-Up in Waste Chute Build Plate Not Detected / Marker Missing Hotend Fan Speed Abnormal / Stopped Homing Failed (X/Y/Z Axis)AMS Filament Change Failed / Purge Timeout Chamber Temperature Too High (PLA/PETG Softening)Print Paused — Door / Cover Open Printing CF Material with Wrong Nozzle CR Touch / BLTouch Leveling Failure Sprite Extruder Clicking / Grinding Filament X/Y Belt Tension Issues (Loose or Over-tight)Klipper Input Shaper / Pressure Advance Tuning Thermal Runaway Protection Triggered Bed Leveling Springs Losing Tension Creality Print / Slicer Compatibility Issues PTFE / Bowden Tube Wear or Gap IDEX Dual Extruder Calibration Offset Luban Connection / WiFi Transfer Issues Module Switching Problems (3D Print / CNC / Laser)Heated Bed Temperature Uniformity (Large Bed)