Bambu Lab X1 Carbon (X1C)
Best print settings and material compatibility guide for the X1 Carbon
What are the X1 Carbon specs?
| Manufacturer | Bambu Lab |
| Series | X1 |
| Build Volume | 256 x 256 x 256 mm |
| Kinematics | corexy |
| Hotend | Direct Drive |
| Enclosure | Yes |
| Active Cooling | Yes |
| Multi-Material | Yes |
| Max Speed | 500 mm/s |
| Max Nozzle Temp | 300°C |
| Firmware | bambu |
| Default Slicer | Bambu Studio |
What should I know about the X1 Carbon?
- Flagship CoreXY with active chamber heating — prints all materials including PA, PC, PPA, PPS
- Hardened steel nozzle included — ready for CF/GF filaments out of the box
- LiDAR-based first layer inspection and spaghetti detection
- Active chamber heating up to 60°C for best results with ABS/ASA/PC/PA
What materials can I print on the X1 Carbon?
The Bambu Lab X1 Carbon (X1C) is compatible with 17 materials. Its enclosed build chamber makes it suitable for both easy and engineering-grade materials.
Get optimized settings for your X1 Carbon
Use Print Advisor to generate a Bambu Studio profile tailored to your X1 Carbon, material, and priorities.
Open Print Advisor