Bambu Lab P1S
Best print settings and material compatibility guide for the P1S
What are the P1S specs?
| Manufacturer | Bambu Lab |
| Series | P1 |
| Build Volume | 256 x 256 x 256 mm |
| Kinematics | corexy |
| Hotend | Direct Drive |
| Enclosure | Yes |
| Active Cooling | No |
| Multi-Material | Yes |
| Max Speed | 500 mm/s |
| Max Nozzle Temp | 300°C |
| Firmware | bambu |
| Default Slicer | Bambu Studio |
What should I know about the P1S?
- Enclosed CoreXY at a lower price point — great value for ABS/ASA/PA
- No active cooling — open the door/top for PLA/PETG to prevent heat creep
- Upgrade to hardened nozzle before printing CF/GF filaments
- Passive enclosure provides enough warmth for most engineering materials
What materials can I print on the P1S?
The Bambu Lab P1S is compatible with 8 materials. Its enclosed build chamber makes it suitable for both easy and engineering-grade materials.
Use with caution
These materials may work but require extra care, modifications, or an aftermarket enclosure:
Get optimized settings for your P1S
Use Print Advisor to generate a Bambu Studio profile tailored to your P1S, material, and priorities.
Open Print Advisor